Climate change is one of several drivers of recurrent outbreaks and geographical range expansion of zoonotic infectious diseases in Europe. Policy and decision-makers need tailored monitoring of climate-induced disease risk, and decision-support tools for timely early warning and impact assessment for proactive preparedness and timely responses. The abundance of open data in Europe allows the establishment of more effective, accessible, and cost-beneficial prevention and control responses. IDAlert will co-create novel policy-relevant pan-European indicators that track past, present, and future climate-induced disease risk across hazard, exposure, and vulnerability domains at the animal, human and environment interface. Indicators will be sub-national, and disaggregated through an inequality lens. We will generate tools to assess cost-benefit of climate change adaptation and mitigation measures across sectors and scales, to reveal novel policy entry points and opportunities. Surveillance, early warning and response systems will be co-created and prototyped to increase health system resilience at regional and local levels, and explicitly reduce socio-economic inequality. Indicators and tools will be co-produced through multilevel engagement, innovative methodologies, existing and new data streams and citizen science, taking advantage of intelligence generated from selected hotspots in Spain, Greece, The Netherlands, Sweden, and Bangladesh that are experiencing rapid urban transformation and heterogeneous climate-induced disease threats. For implementation, IDAlert has assembled European authorities in climate modelling, infectious disease epidemiology, social sciences, environmental economics, One Health and EcoHealth. Further, by engaging critical stakeholders from the start, IDAlert will ensure long-lasting impacts on EU climate policy, and provide new evidence and tools for the European Green Deal to strengthen population health resilience to climate change.

Restoring and maintaining the resilience of the Black Sea ecosystem, while enabling a sustainable exploitation of its natural resources is vital. A better coordination and alignment of research and innovation efforts alongside developing improved knowledge base and joint infrastructures could substantially support this timely challenge. Towards this end the Burgas Vision Paper was produced, by an initiative supported by EC, as the key framework document for a shared vision for a productive, healthy, resilient, sustainable and better-valued Black Sea by 2030. It addresses the four key pillars on which a new Strategic Research and Innovation Agenda (SRIA) and its Implementation Plan can be built on: (1) Addressing fundamental Black Sea research challenges, (2) Developing products, solutions and clusters underpinning Black Sea Blue Growth, (3) Building of critical support systems and innovative Infrastructures, (4) Education and capacity building. Building on this recently emerging policy framework, the core contribution of the Black Sea CONNECT CSA will be to scientifically, technically and logistically support the Black Sea Blue Growth Initiative towards the implementation of the Burgas Vision Paper, with a view on boosting the blue economy in the region. The overall objective is to coordinate the development of the SRIA and its implementation plan both at national and regional level. The SRIA and its implementation plan will guide stakeholders from academia, funding agencies, industry, policy and society to address together the fundamental Black Sea challenges, to promote blue growth and economic prosperity of the Black Sea region, to build critical support systems and innovative research infrastructure and to improve education and capacity building. The project will support the design of synergistic activities such as developing an operational network of funders, new transnational joint activities and achieving the knowledge transfer.

GrowBot proposes a disruptively new paradigm of movement in robotics inspired by the moving-by-growing abilities of climbing plants. Plants are still a quite unexplored model in robotics and ICT technologies, as their sessile nature leads to think that they do not move. Instead, they move greatly, on a different time scale, purposively, effectively and efficiently. To move from one point to another, plants must grow and continuously adapt their body to the external environmental conditions. This continuous growth is particularly evident in climbing plants. By imitating them, the GrowBot objective is to develop low-mass and low-volume robots capable of anchoring themselves, negotiating voids, and more generally climbing, where current climbing robots based on wheels, legs, or rails would get stuck or fall. Specifically, the ability to grow will be translated by additive manufacturing processes inside the robot, which creates its body by depositing new materials with multi-functional properties, on the basis of the perceived external stimuli (without a pre-defined design). Energy efficiency will be intrinsic to such approach, but novel bio-hybrid energy harvesting solutions will be also implemented to generate energy by interfacing soft technologies with real plants. Perception and behavior will be based on the adaptive strategies that allow climbing plants to explore the environment, described mathematically after experimental observations. GrowBot would contribute to consolidate this ground-breaking and pioneering research area on plant-inspired robotics that, although still in its infancy, can represent a revolutionary approach in robotics, as it has already happened with plant-inspired solutions in material science. GrowBot is based on a strongly interdisciplinary character and can open the way for a new technological paradigm around the concept of growing robots, fostering a European innovation eco-system for several high-tech sectors.

INNOMEM gathers some of the most recognised Membrane departments (>20) in Europe and acknowledged facilitators of technology transfer, corporate finance, funding and coaching, making available (i) the most promising and breakthrough manufacturing pilots and (ii) advanced characterization techniques and modelling together with (iii) non-technical services through this Test Bed: while relevant improvement metrics can be defined, the potential network of reachable stakeholders counts thousands of businesses on an international scale. Key facts are reported below. Within the scope of INNOMEM, main different types of membrane materials (polymeric, ceramic, metallic and nanocomposite), surface modification, membrane morphology and geometry and applications will be covered, providing for the first time a single entry point for industrial partners, mainly SMEs, aspiring to answer their concerns but with minimum investment costs and reduction of risks associated with technology transfer, while opening-up opportunities for demonstration of innovative nanomembranes in real life industrial problems (TRL7) and thus faster opening the market for these new products. The main KPIs for INNOMEM: Technical: 20% Membrane productivity improvement, 30% faster verification, >40% CO2 emissions and energy consumption reduction. Non-Technical: 10 Showcases, >15 Democases, >100 reachable SMEs and > 300 reachable investors. INNOMEM stems from the consideration that the development of products based on advanced membranes and nanomaterials require access to finance and an optimised business planning, relying on a sound prior analysis of the market, of the economic impacts and capacity of a company. The project aims at developing and organizing a sustainable Open Innovation Test Bed (OITB) for nano-enabled membranes for different applications. The OITB will also offer a network of facilities and services through a Single Entry Point (SEP) to companies (inside or outside Europe).

The aim of the EMMC-CSA is to establish current and forward looking complementary activities necessary to bring the field of materials modelling closer to the demands of manufacturers (both small and large enterprises) in Europe. The ultimate goal is that materials modelling and simulation will become an integral part of product life cycle management in European industry, thereby making a strong contribution to enhance innovation and competitiveness on a global level. Based on intensive efforts in the past two years within the European Materials Modelling Council (EMMC) which included numerous consultation and networking actions with representatives of all stakeholders including Modellers, Software Owners, Translators and Manufacturers in Europe, the EMMC identified and proposed a set of underpinning and enabling actions to increase the industrial exploitation of materials modelling in Europe EMMC-CSA will pursue the following overarching objectives in order to establish and strengthen the underpinning foundations of materials modelling in Europe and bridge the gap between academic innovation and industrial application: 1. Enhance the interaction and collaboration between all stakeholders engaged in different types of materials modelling, including modellers, software owners, translators and manufacturers. 2. Facilitate integrated materials modelling in Europe building on strong and coherent foundations. 3. Coordinate and support actors and mechanisms that enable rapid transfer of materials modelling from academic innovation to the end users and potential beneficiaries in industry. 4. Achieve greater awareness and uptake of materials modelling in industry, in particular SMEs. 5. Elaborate Roadmaps that (i) identify major obstacles to widening the use of materials modelling in European industry and (ii) elaborate strategies to overcome them. This EMMC-CSA stems directly out of the actions of the EMMC and will continue and build upon its existing activities.