Structural application of fibre-reinforced polymer (FRP) composite materials is one of the key factors leading to technological innovations in aviation, chemical, offshore oil and gas, rail and marine sectors. Motivated by such successes, FRP shapes and systems are increasingly used in the construction sector, such as for bridges and small residential buildings. An obstacle to a wider use of FRP materials in structural engineering is the current lack of comprehensive design rules and design standards. While the preparation of design guidance for static actions is at an advanced stage in the USA and EU, the design against dynamic loading is underdeveloped, resulting in cautious and conservative structural design solutions. Knowledge on the dynamic properties (natural frequencies, modal damping ratios, modal masses and mode shapes of relevant vibration modes) of FRP structures and their performance under dynamic actions (such as pedestrian excitation, vehicle loading, wind and train buffeting) needs to be advanced if to achieve the full economic, architectural and engineering merits in having FRP components/structures in civil engineering works. This project will provide a step change to design practice by developing new procedures and recommendations for design against dynamic actions. This will be achieved by: 1) Developing an instrumented bridge structure at the University of Warwick campus that will provide unique insight into both static and dynamic performance over the course of the project, and beyond; 2) Providing novel experimental data on dynamic properties and in-service vibration response of ten full-scale FRP structures; and 3) Critical evaluation of the numerical modelling and current vibration serviceability design approaches. The data collected will be delivered in a systematic form and made available, via an open-access on-line database for rapid and easy dissemination, to academic and industrial beneficiaries, as well as to agencies supporting the preparation of institutional, national and international consensus design guidance. Outcomes from this project will provide the crucial missing information required for the reliable design of light-weight FRP structures, and pave the way towards this structural material becoming a 'material of choice' for future large-scale bridges and other dynamically loaded structures. This medium to longer-term impact is aligned with national plans for the UK having a sustainable and resilient built environment.

The increasing amounts of renewable energy present on the national grid reduce C02 emissions caused by electrical power but they fit into an electrical grid designed for fossil fuels. Fossil fuels can be turned on and off at will and so are very good at matching variations in load. Renewable energy in the form of wind turbines is more variable (although that variability is much more predictable than most people think) and there is a need for existing power plants to operate much more flexibly to accommodate the changing power output from wind, tidal and solar power. This work brings together five leading Universities in the UK and a number of industrial partners to make conventional power plants more flexible. The research covers a wide range of activities from detailed analysis of power station parts to determine how they will respond to large changes in load all the way up to modelling of the UK electrical network on a national level which informs us as to the load changes which conventional power plants will need to supply. The research work is divided up into a number of "workpackages" for which each University is responsible together they contribute to four major themes in the proposal: Maintaining Plant Efficiency, Improving Plant Flexibility, Increasing Fuel Flexibility and Delivering Sustainability. Cambridge University will be conducting research into wet steam methods. Water is used as the working fluid in power plant as it has excellent heat transfer properties. However in the cold end of power extraction turbine the steam starts to condense into water and droplets form this is especially a problem at part load. The work at Cambridge will allow this process to be predicted better and lead to better designs. Durham University will contribute two different work packages: modelling work of the entire UK power system and the introduction of the world's first dynamically controlled clearance seal. The modelling work will enable the requirements for plant flexibility to be determined accurately. The dynamic seal developed in conjunction with a major UK manufacturer will allow the turbine to maintain performance as the load varies. Oxford University - Improved Heat Transfer Methods for Turbine Design. The output from this work will be a highly accurate coupled fluid flow and heat transfer calculations that will enable designers to better predict the thermal transients inside power stations. Leeds and Edinburgh University will lead work on increasing the use of biomass fuels. The modelling work at Leeds will allow plant operators to devise suitable measures to minimise the environmental impact of burning biomass. Leeds and Edinburgh University will contribute the development of a Virtual Power Plant Simulation Tool This work acts as a bridge between the different project partners as inputs from the models produced at Durham, Cambridge, Oxford and Leeds are combined. This tool based on the latest research findings can be used to optimize transient operations such as fast start-up and load following as wind turbine output varies.

This proposal is to establish a DTC in Wind and Marine Energy Systems. It brings together the UK's leading institutions in Wind Energy, the University of Strathclyde, and Marine Energy, the University of Edinburgh. The wider aim, drawing on existing links to the European Research Community, is to maintain a growing research capability, with the DTC at is core, that is internationally leading in wind and marine energy and on a par with the leading centres in Denmark, the USA, Germany and the Netherlands. To meet the interdisciplinary research demands of this sector requires a critical mass of staff and early stage researchers, of the sort that this proposal would deliver, to be brought together with all the relevant skills. Between the two institutions, academic staff have in-depth expertise covering the wind and wave resource, aerodynamics and hydrodynamics, design of wind turbines and marine energy devices, wind farms, fixed and floating structures, wind turbine, wind farm and marine energy devices control, power conversion, condition monitoring, asset management, grid-integration issues and economics of renewable energy. A centre of learning and research with strong links to the Wind and Marine Energy industry will be created that will provide a stimulating environment for the PhD students. In the first year of a four year programme, a broad intensive training will be provided to the students in all aspects of Wind and Marine Energy together with professional engineer training in research, communication, business and entrepreneurial skills. The latter will extend throughout the four years of the programme. Research will be undertaken in all aspects of Wind and Marine Energy. A DTC in Wind and Marine Energy Systems is vital to the UK energy sector for a number of reasons. The UK electricity supply industry is currently undergoing a challenging transition driven by the need to meet the Government's binding European targets to provide 15% of the UK's total primary energy consumption from renewable energy sources by 2020. Given that a limited proportion of transport and heating energy will come from such sources, it is expected that electricity supply will make the major contribution to this target. As a consequence, 40% or more of electricity will have to be generated from non-thermal sources. It is predicted that the UK market for both onshore and offshore wind energy is set to grow to £20 billion by 2015.There is a widely recognised skills gap in renewable energy that could limit this projected growth in the UK and elsewhere unless the universities dramatically increase the scale of their activities in this area. At the University of Strathclyde, the students will initially be housed in the bespoke accommodation in the Royal College Building allocated and refurbished for the existing DTC in Wind and Marine Energy Systems then subsequently in the Technology and Innovation Centre Building when it is completed. At the University of Edinburgh, the students will be housed in the bespoke accommodation in the Kings Buildings allocated and refurbished for the existing IDC in Offshore Renewable Energy. The students will have access to the most advanced design, analysis and simulation software tools available, including the industry standard wind turbine and wind farm design tools and a wide range of power system and computation modelling packages. Existing very strong links to industry of the academic team will be utilised to provide strategic guidance to the proposed DTC in Wind and Marine Energy through company membership of its Industrial Advisory Board and participation in 8 week 7 projects as part of the training year and in 3 year PhD projects. In addition, to providing suggestions for projects and engaging in the selection process, the Industry Partners provide support in the form of data, specialist software, access to test-rigs and advice and guidance to the students.